Assembly - Weslo 831.215000 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
driver , and pliers
Use the drawings below to identify the small parts used for assembly. The number in parenthesis below each
drawing is the key number of the part, from the PART LIST on page 14. The number following the key number is
the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in
the parts bag, check to see if it has been pre-assembled. If a part is missing, call toll-free 1-866-699-3756.
M4 x 5mm M4 x 16mm
Screw (14)–2 Screw (49)–5
M8 x 58mm Button Bolt (6)–1
1. While another person lifts the front of the Frame (1)
slightly, attach a Stabilizer (2) with two M10 x 65mm
Carriage Bolts (30) and two M10 Nylon Locknuts (33).
2. While another person lifts the rear of the Frame (1)
slightly, attach a Stabilizer (2) with two M10 x 65mm
Carriage Bolts (30) and two M10 Nylon Locknuts (33).
.
M8 x 15mm Button
Screw (34)–3 Washer (42)–8
4
M8 Split M8 Nylon
Locknut (10)–5
M10 x 65mm Carriage Bolt (30)–4
1
30
2
2
33
1
, Phillips screw-
M10 Nylon
Locknut (33)–4
1
33
33
2
30