Weslo 831.215000 User Manual page 5

3. The Console (16) requires three AA batteries; alkaline
batteries are recommended. Insert three batteries into
the battery compartment. Make sure that the batter-
ies are oriented as shown by the markings inside
the battery compartment.
4. Hold the Console (16) near the Handlebar (15). Insert
the console wire into the indicated hole in the
Handlebar. Next, attach the ground wire to the
Handlebar with an M4 x 16mm Screw (49).
Attach the Console (16) to the Handlebar (15) with four
M4 x 16mm Screws (49). Be careful to avoid pinch-
ing the wires.
5. While another person holds the Handlebar (15) near
the Upright (13), connect the console wire to the
Extension Wire (56). Attach the Handlebar to the
Upright with three M8 x 15mm Button Screws (34) and
three M8 Split Washers (42). Be careful to avoid
pinching the wires.
3
Batteries
16
4
Console
Wire
Hole
49
5
34
42
34
5
16
49
Ground
Wire
15
Be careful to
avoid pinching
the wires.
49
Be careful
to avoid
pinching the
wires.
15
Console Wire
56
34
42
13