Catler 400 series Instruction Manual page 7

 When processing dry, thick or
heavy mixtures, interrupt the
process after 30 seconds. Stir
the ingredients and allow the
motor to rest for 1 minute at
least.
 Recipes in the manual are
considered as common food
amount in household.
 If food becomes lodged
around the processing blade,
turn off the appliance by
releasing the main switch and
disconnect the power cord
from the power outlet. Use
a spatula, or plastic knife, to
dislodge the food. In no cases
use your fi ngers to dislodge
the food. The blades are very
sharp.
 Do not insert your hand
into the mixing bowl if the
appliance is in process.
 Do not remove the appliance
from the mixing mixture
during operation. Turn off the
appliance at fi rst, disconnect
the power cord from the
power outlet and wait until the
blades stop turning. Then you
can remove the appliance from
the mixing mixture.
 Do not push food into the
food chute with your fi ngers
or other utensils. Always use
the food pusher provided.
 Keep fi ngers, hands, knives
and other utensils away from
moving blade and discs.
 Do not place hands or fi ngers
in the processing bowl
of the food processor unless
the motor, processing blade,
dough blade or disc has come
to a complete stopped. Ensure
the appliance is switched off
at the power outlet and the
power cord is unplugged
before removing the lid from
the processing bowl.
 Do not leave the appliance
unattended when in use.
 Do not use the appliance with
wet hands.
 Always ensure the appliance
has been turn off before
attempting to move the
appliance, when the appliance
is not in use and before
cleaning and storing. Then you
can unplug the appliance from
the power outlet.
7
CATLER RECOMMENDS SAFETY FIRST