Troubleshooting - Catler 400 series Instruction Manual

TROUBLESHOOTING

PROBLEM
Blades don't turn when
processing.
Unable to lock lid into place.
Gear box in lid jumps out of lid
when processing.
Masher leg won't attach onto
masher drive.
Blades won't remove from
potato masher.
Grating disc slows down when
grating.
Processing bowl does not sit fl at
onto storage base.
Motor sounds like it is not
coping with processing load.
SOLUTION
• May be too much food in bowl. Reduce quantity.
• Pieces of food, such as meat are too large.
Reduce size.
• Spindle may be out of position. Remove lid,
straighten spindle as vertical as possible and
reposition lid.
• Food may be stuck underneath the quad blade
preventing the lid from being locked into place.
Food such as nuts can be loaded through the
feed chute.
• Replace gear box and ensure that the control
grip is held vertically and fi rmly.
• Ensure mashing leg and gear box arrow
graphics are vertically aligned. Twist masher leg
anticlockwise to lock for use.
• Mashing leg must be assembled to gearbox
and motor body to remove blade. Rotate blade
clockwise to remove.
• Grating has exceeded Max level. Empty bowl
and continue to grate.
• Too much force is being used when grating.
Reduce force when pushing.
• Ensure adjustable slicing disc is set to 'Storage
Position' .
• Speed may not be correct. Refer to processing
guide for correct speeds.
25
TROUBLESHOOTING