Catler 400 series Instruction Manual page 22

CARE, CLEANING & STORAGE
MOTOR BODY
To remove any food residue wipe the motor
body and cord with a damp cloth only.
Do not use abrasive cleaners or steel wool.
Never immerse the motor body in water or
any other liquid. Do not place motor body in
dishwasher.
CAUTION:
Never immerse the motor body or
gearbox in water or any other liquid.
BLENDING LEG
Before cleaning, turn the power off at the
power outlet and then remove the plug.
Remove the motor body from the stainless
steel blending leg. The stainless steel
blending leg can be hand washed in hot
soapy water, rinsed and dried thoroughly
after each use. Alternatively, the blending leg
can also be washed in the dishwasher.
Do not use abrasive cleaners or steel wool.
QUICK WASH: Between each processing task,
with the motor body attached and turned on
at the power outlet, place the stainless steel
blending leg and blade assembly only in to
a jug of water and press the trigger switch to
turn on for 5 seconds.
This will remove any food on the blade and
leg and allow you to continue onto the next
processing task.
FOOD PROCESSING BOWL, FOOD
PROCESSING BOWL LID, QUAD BLADE,
ADJUSTABLE SLICING DISC & REVERSIBLE
SHREDDER
Before cleaning, turn the power off at the
power outlet and then remove the plug.
Remove the motor body from the food
processing bowl lid and gear box. Remove
the food processing bowl lid and quad blade
| processing discs from the food processing
bowl.
22
CARE, CLEANING & STORAGE
The lid is dishwasher safe remove the
removable gear box from the lid prior to
placing in the dishwasher.
The food processing bowl, bowl lid, quad
blade and processing discs should be hand
washed in hot soapy water, rinsed and dried
thoroughly after each use. Alternatively,
the food processing bowl, bowl lid, quad
blade, adjustable slicing disc and reversible
shredder can also be washed in the
dishwasher. The quad blade comes with
a cover for your safety. This cover can be used
on the blade in the dishwasher. Do not use
abrasive cleaners or steel wool.
CARE & CLEANING OF THE GEARBOX
The gearbox should always be removed from
the lid prior to any cleaning.
The gearbox lifts out of the lid by pulling
it up.
The gear box is not dishwasher safe and should
never be immersed in liquid at all.
To clean the gearbox, remove from the lid
and wipe down with a damp cloth only.
Do not use abrasive cleansers or steel wool.
NOTE
NOTE