Catler 400 series Instruction Manual page 17

TO USE THE FOOD PROCESSOR
For food preparation tips and recipes refer to
the recipe section of this booklet.
1. Insert the plug into a 230/240V power
outlet and turn the power on.
2. Select a speed between 1–15 on the
speed control dial.
3. Press the trigger switch to turn the
appliance on and start the processing
action.
4. Feed the food through the feed chute
of the food processor, using the food
pusher to push it down.
CAUTION:
Only use the small pusher with the
large pusher resting inside the feed
chute.
5. When processing has fi nished switch
off the motor by releasing the trigger
switch, switch off at the power outlet and
remove the power plug.
6. Detach the food processing bowl and
lid (refer to instructions). Remove the lid
from the food processor bowl. Carefully
remove the food processing blades or
quad blade and use a spatula to scrape
off any attached food back into food
processing bowl.
TO DETACH THE FOOD PROCESSING BOWL
AND LID
Ensure the switch is released, power is turned
off at power point and the appliance
is unplugged.
Hold the motor body with one hand and
using thumb and fi nger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the chopper bowl lid to detach.
17
ASSEMBLY & OPERATION