Catler 400 series Instruction Manual page 23

POTATO MASHER LEG
Before cleaning, turn the power off at the
power outlet and then remove the plug. The
masher leg can be hand washed in hot soapy
water, rinsed and dried thoroughly after each
use.
TO DISASSEMBLE THE POTATO MASHING
LEG
1. Ensure the motor is unplugged. Before
removing the masher leg, unlock the
blade by rotating in a clockwise direction.
Blade will not detach once the masher
leg is released from motor body.
2. Once the blade is removed hold the
motor body with one hand, and using
thumb and fi nger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor
body away from the masher to detach.
3. Unclip the gear box from motor body,
turn the masher leg to align and remove
the inner and outer legs from the gear
box together.
4. The inner and outer legs can now be
separated.
Both of the legs can now be washed in hot
soapy water, rinsed and dried thoroughly.
Alternatively, the masher can be washed
in the dishwasher.
CAUTION:
Do not use abrasive cleaners or steel
wool.
Masher gear box is not dishwasher safe.
NOTE
23
CARE, CLEANING & STORAGE