Restarting - Mercedes-Benz 2013 C-Class Coupe Owner's Manual

Tyre pressure
352
The function of the tyre pressure loss warning
system is limited or delayed if:
snow chains are fitted to your vehicle's
R
tyres.
road conditions are wintry.
R
you are driving on sand or gravel.
R
you adopt a very sporty driving style (cor-
R
nering at high speeds or driving with high
rates of acceleration).
you are towing a very heavy or large trailer.
R
you are driving with a heavy load (in the
R
vehicle or on the roof).
Restarting the tyre pressure loss warn-
ing system
Restart the tyre pressure loss warning system
if you have:
changed the tyre pressure
R
changed the wheels or tyres
R
fitted new wheels or tyres
R
X
Before restarting, consult the table of tyre
pressures on the inside of the fuel filler flap
to ensure that the tyre pressure in all four
tyres is set correctly for the respective
operating conditions.
The tyre pressure loss warning system can
only give reliable warnings if you have set
the correct tyre pressure. If an incorrect
tyre pressure is set, these incorrect values
will be monitored.
X
Observe the notes in the section on tyre
pressures ( Y
Restarting using the 4-button multifunc-
tion steering wheel
X
Make sure that the key is in position 2 in
the ignition lock.
X
Press the V button to select
pressure Menu:
page 350).
Tyre
R.
X
Press the C button.
RFI active Restart: R
The
appears in the multifunction display.
X
Press the C button.
Tyre press. OK?
The
the multifunction display.
If you wish to confirm the restart:
X
Press the W button.
Run Flat Indicator restarted
The
message appears in the multifunction dis-
play.
After a teach-in period, the tyre pressure
loss warning system will monitor the set
tyre pressures of all four tyres.
or
If you wish to cancel the restart:
X
Press the X button.
The tyre pressure values stored at the last
restart will continue to be monitored.
Restarting using the 12-button multifunc-
tion steering wheel
X
Make sure that the key is in position 2 in
the ignition lock.
X
Press the = or ; button to select the
Service
menu.
X
Press the 9 or : button to select
Tyre pressure.
X
Press the a button.
Run Flat Indicator active
The
Restart with OK
multifunction display.
If you wish to confirm the restart:
X
Press the a button.
Tyre pressure now OK?
The
appears in the multifunction display.
X
Press the 9 or : button to select
Yes.
X
Press the a button.
Run Flat Indicator restarted
The
message appears in the multifunction dis-
play.
message
message appears in
message appears in the
message