Regency FP90 Owners & Installation Manual page 19

Majestic SK8 Chimney System
SECURITY SECURITY
FTF8 FLUE FTF8 FLUE
Security FTF8 Chimney System
5) Place the fi rst section of the outer chimney pipe into the
outer pipe adapter collar. Make sure the pipe is seated
properly on the outside of the adapter collar and use three
(3) #8 self-drilling screws to fasten the pipe to the collar.
(Screws provided).
918-439a
WOOD FIREPLACE
CENTER OUTER FLUE
ADAPTER ASSY.
AND ANCHOR TO TOP
OF FIREPLACE
USING 4-#8 SCREWS
CENTER OUTER
FLUE ADAPTER ASSY.
AND ANCHOR TO TOP
OF FIREPLACE
USING 4-#8 SCREWS
PAGE 3 OF 3
Majestic SK8 Chimney System
Security FTF8 Chimney System
6) The remaining sections of chimney pipe will be installed
following the manufacturers instructions. The remaining
sections will use snap-lock connections to hold the chimney
together. Plan your chimney installation carefully. It is diffi cult
to dis-engage the chimney sections once they have been
locked together with the snap-locking tabs. The chimney
sections may be damaged if they have to be removed and
can not be used again if the locking tabs do not hold the
connections tightly.
installation
FP90
OUTER
CHIMNEY SECTION
USE 3 SCREWS
OUTER
CHIMNEY SECTION
USE 3 SCREWS
09/19/05
FP90 Wood Fireplace |
|
19
19