Maintenance Information; Maintenance Requirements - Fujitsu MCE3064SS Product Manual

Table of Contents

Advertisement

(3)
Write/read test
Use a disk whose operation check data may be destroyed so that a write or read test can be
executed with an arbitrary data pattern.
6.2

Maintenance Information

6.2.1

Maintenance requirements

Service system and repair
Fujitsu provides a service system and repair facility for its optical disk drive.
information required to replace or repair the drive to your Fujitsu representative. The following
information should be included:
a) Optical disk drive model, part number (P/N), revision number, serial number (S/N), and date
of manufacture
b) Failure status
Date of the failure
System configuration
Environment conditions (temperature, humidity, and supply voltage)
c) Failure history
d) Failure
Description of the failure
Issued commands and specified parameters
Sense data
Other error analysis information
Data loss
In case of regular repair, the optical disk cartridge should not be
attached except where the cartridge causes the error. And before
having the drive repaired, save the data in the cartiridge. Fujitsu is
not responsible for data lost during maintenance or repair.
See Section 4.1 for details on packing and handling the drive when sending it to Fujitsu.
C156-E097-01EN
Submit
6 - 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcf3064ss

Table of Contents