Cleaning Procedure (3) - Fujitsu MCE3064SS Product Manual

At setting the cartridge to the setting case, do not apply the heavy
shock and push hardly.
3) Cover the cartridge with the setting case cover, then insert the spindle pin into the center
hub of the cortridge.
Revolver
Setting case cover
4) Remove a slender piece that causes a defect from the disk surface at wiping the disk
media.
5) Moisten the cleaning cloth with a few drops of cleaning solution.
In case of contact with eyes, immediately flush eyes with water.
6) Wipe the disk surface from the hub outward.
5 - 12
Figure 5.8

Cleaning procedure (3)

C156-E097-01EN
Disk media
Cartridge opening
Disk hub