Chapter 5 Operation And Cleaning; Operating Optical Disk Drive; Optical Disk Drive; Optical Disk Drive Front View (With Panel) - Fujitsu MCE3064SS Product Manual

CHAPTER 5
This chapter describes how to operate and clean the drive and the optical disk cartridges.
5.1

Operating Optical Disk Drive

The drive has an automatic load function. All the operator must do is to insert the optical disk
cartridge and operate the eject button.
This section explains loading and ejection methods, assuming that the drive is mounted
horizontally. (When mounted vertically, the drive is operated in the same manner as when
mounted horizontally.)
Figure 5.1 shows the front view of the optical disk drive. For operation, users should be familiar
with the parts in the figure and their function. Loading and ejection methods are described
below.
5.1.1

Optical disk drive

1) Disk insertion slot
Figure 5.1
The following explains the parts and functions of the optical disk drive (the following numbers
correspond to the numbers in Figures 5.1):
OPERATION AND CLEANING
5.1 Operating Optical Disk Drive
5.2 Cleaning Drive
5.3 Optical Disk Cartiridge Operation
5.4 Cleaning Optical Disk Cartiridge
3) Manual eject hole

Optical disk drive front view (with panel)

C156-E097-01EN
2) Eject button/
BUSY LED
5 - 1