Epson Stylus pro 7900 Repair Manual page 237

Pro 7900 and 9900 Field Repair Guide
3. Configure the PCU.
1. Turn on the Oven.
3. Press this button to "Lock In" the temperature setting.
5. Wait for the temperature to reach
Note: It is critical that the Transport Belt is moving while the heater is above
Centrigrade. Do not turn off the Main Power Switch until the Oven is turned off, and
the temperature drops below
turned off, the Transport Belt stops moving.
PCU (Plate Curing Unit) Troubleshooting
2. Set the Temperature to
100.0
Printer Component, Software Item,
190.0 (Centigrade). Use the
190.0 (Centigrade).
Centrigrade. When the Main Power Switch is
LCD Display, Printer Button
Up and Down Arrows.
4. Turn this Knob to 1.5.
100.0
Page 237.