Advertisement
ADJUSTMENT
ADJUSTMENT
FIGURE 40
STEP 40:
• Adjustments can be made in the above locations to set the correct amount of tension in the cables.
• For maximum performance, the HEAD PLATE should should just barely sit on the top WEIGHT PLATE and the UPPER FLOATING
PULLEY BRACKET should firmly contact the end cap in the TOP BOOM, and the LOWER FLOATING PULLEY BRACKET should
firmly contact the BASE.
1/2
0
1/2
1
2
UPPER FLOATING PULLEY BRACKET
1/2
1/2
3
27
ADJUSTMENT
LOWER FLOATING
PULLEY BRACKET
1/2
4
5
1/2
6
Advertisement
