Advertisement
STEP 11
• Securely assemble the PEC SEAT PAD (27) to the FRONT UPRIGHT
(11) as shown, using two 3/8 X 4" BOLTS (41), and two 3/8" WASH-
ERS (51) as shown in FIGURE 11.
• Assemble two ROLLER PADS (31) to the FRONT UPRIGHT (11) using
one 16" TUBE (30), and two STARLOCK COLLARS (73) as shown in
FIGURE 11.
FIGURE 12
STEP 12
• Loosely attach FRONT UPRIGHT (11) to the BASE (10) using two 3/8 X 3" BOLTS (39), four 3/8" WASHERS (51), and two
3/8" LOCKNUTS (48) as shown in FIGURE 12. (NOTE: Make sure cable is routed under the bolts.)
• Loosely attach FRAME SUPPORT (1) to the BASE (10) using one 3/8 X 3" BOLT (39), two 3/8" WASHERS (51), and one 3/8"
LOCKNUT (48) as shown in FIGURE 12. (NOTE: Make sure cable is routed under the bolts.)
• Loosely attach FRAME SUPPORT (1) to the FRONT UPRIGHT (11) using two 3/8 X 4" BOLTS (41), four 3/8" WASHERS (51),
and two 3/8" LOCKNUTS (48) as shown in FIGURE 12.
3/8 X 4" 41
FIGURE 11
11
3/8 X 3" 39
10
11
51
30
• All WASHERS & LOCKNUTS
are 3/8" WASHERS (51) & 3/8"
LOCKNUTS (48).
1
10
27
73
31
41 3/8 X 4"
Advertisement
