FIGURE 32
STEP 32
• Route ball end of LEG EXT. CABLE (90) under pulley and cable retaining clip on LEVER STOP (12) as shown in FIGURE 32.
(NOTE: The bolt holding pulley and cable retaining clip may need to be loosened to align cable retaining clip with cable.)
• Route ball end of LEG EXT. CABLE (90) under pulley and cable retaining clip on PRESS ARM LEVER (9). (NOTE: The bolt
holding pulley and cable retaining clip may need to be loosened to align cable retaining clip with cable.)
STEP 33
•
After routing ball end of LEG EXT. CABLE
(90) through SWIVEL PULLEY BRACKET
(23), attach two 3-1/2" PULLEYS (79) using
two 3/8" X 2" BOLTS (37) and two 3/8" LOCK-
NUTS (48). See FIGURE 33.
1/2
0
3/8 X 2" 37
FIGURE 33
1/2
1/2
1
2
12
1/2
1/2
3
4
23
90
9
79
48
23
90
1/2
5
6