Advertisement
FIGURE 13
STEP 13
• Route the threaded end of LAT CABLE (92) through the TOP BOOM (7) as shown in FIGURE 13.
•
Loosely assemble four 3-1/2" PULLEYS (79) to the slots in TOP BOOM (7) using four 3/8 X 2-3/4" BOLTS (38), eight 3/8"
FLANGE SPACERS (66), and four 3/8" LOCKNUTS (48) as shown in FIGURE 13. (NOTE: Make sure the cable is routed
under all the pulleys.)
STEP 14
•
Snap two WEIGHT PLATE BUSHINGS (47) each,
into the PARABODY side of fifteen WEIGHT
PLATES (74) as shown in FIGURE 14.
1/2
0
7
1/2
1
2
66
48
FIGURE 14
1/2
1/2
3
11
• All FLANGE SPACERS & LOCKNUTS
are 3/8" FLANGE SPACERS (66) & 3/8"
LOCKNUTS (48).
79
38 3/8 X 2-3/4"
92
1/2
4
5
47
74
1/2
6
Advertisement
