Page 1
PEARL DRUM PEDAL P-3000C Instruction Manual Congratulations on your purchase! To get optimum performance of your "P-3000C" Drum Pedal, please read this Instruction Manual before playing. Control Core Beater Beater Setting Stopper Beater Holder Link Key Bolt (for Beater Position Adjustment)
Page 2
Beater Stroke Adjustment Insert the Control Core Beater into the Beater Holder Link The P-3000C Demon Chain Pedal features Pearl's patented until it stops against the Beater Setting Stopper, and tighten two-position Beater Holder that can be positioned closer or the Key Bolt with the provided Multi Function Drum Key farther from the drum head for Finesse "A"...
Page 3
Duo-Deck Footboard Note P-3000C features Pearl's patented Duo-Deck If the Beater is too far from the Bass Footboard, the world's first convertible Short / Long Drum Head, the Footboard can Footboard. touch the Hoop Clamp and cause damage to the Footboard and/or the Hoop Clamp.
Page 4
Reattach the Hinge to the Footboard in the position shown with two 3-Piece Screws using the provided Multi-Function The P-3000C Demon Chain Pedal features Pearl's patented Drum Key or Allen wrench (3mm) (Fig.11). Click Lock spring tension retention system. To increase the...
Page 5
Multi-Function Drum Key or Allen wrenches as needed. Velcro Strips for Slip Prevention Velcro Strips are provided with the P-3000C pedal to help prevent slipping when used on carpeted floors. To apply, peel off the backing on the Velcro Strips and apply them in the locations shown.
Need help?
Do you have a question about the P-3000C and is the answer not in the manual?
Questions and answers