Panduit LS7 Operator's Manual page 70

Error
Message
BUFFER • This message appears if you
EMPTY! try to print, but no text has
been entered.
• This message appears if you
try to store a text file in the
memory, but no text has
been entered in the display.
BUFFER • This message appears if you
FULL! try to enter a character,
symbol, barcode, return or
space after 99 characters
have already been entered.
CAN'T • This message appears if a
HERE! character, symbol, s pace or
return is entered while the
cursor is located below the
right half of a barcode and
" " mark.
CHANGE • This message appears if a
ADAPTER high-voltage adapter is
being used.
CHECK • This message appears if you
TAPE! try to print a label or feed the
tape when a tape cassette is
not installed.
• This message appears if you
install a non-Panduit tape
cassette.
• This message appears if the
tape cass ette is not properly
seated.
Cause
• Enter text before printing.
• Enter text before storing.
• Delete some existing text s o
that more can be entered.
• Move the cursor or delete
the barcode and " " mark
before entering the
character, symbol or return.
• Remove the high-voltage
adapter and connect the AC
adapter (LS7-ACS).
• Install a tape cass ette.
• Install a Panduit (green
colored) tape cas sette.
• Remove the back cover of
the printer and re-install
cas sette in printer.
Remedy
67