Basic Operation - Jensen JRV215N Installation And Operation Manual

BASIC OPERATION

Power On/Off

Press the power VOL knob (3) to turn the unit on. The unit will resume at the last mode
(Tuner, Aux, etc.). Press and hold the VOL knob to turn the unit off. While ON, press the
knob to activate the MUTE function.
Volume Control

To increase the volume, rotate the power VOL knob (3) clockwise.

To decrease the volume, rotate the power VOL knob counter-clockwise.

During adjustment, the volume level is displayed in the middle of the display as a
horizontal bar graph with the associated number level setting from 0 (full mute) to 30 (0dB,
no attenuation).

The screen will display the volume indicator bar for 5 seconds and then revert to the
previous mode information.
Reset
Use a ball point pen or thin metal object to press the RESET button (4). The reset button should
be activated for the following reasons:

initial installation of the unit when all wiring is completed

function buttons do not operate

error symbol on the display
Mute

Press the power VOL knob (3) to mute the audio output. "

Press the power VOL knob again to restore the audio output to the previous level.
Menu

Press the MENU button (1) or touch the home icon on-screen in the home menu to access
different modes (Cameras, Navigation, AM/FM, Disc, Bluetooth, USB, SiriusXM, Weather,
AUX 1, AUX 2, Zone2, Settings, Panel off and Dimming). Press and hold MENU to toggle
between day and night dimmer settings when dimming control is turned off in settings.

Swipe from right to left, or touch the 2
Swipe from left to right, or touch the 1

Touch the on-screen button to adjust the settings under the specific mode.
11
JRV215N
" will appear on the display.
nd
dot at the bottom of the screen to go to page 2.
st
dot at the bottom of the screen to return to page 1.