Operation - Panasonic VQT9958 Operating Instructions Manual

CONTENTS
Setup menus
USER menu
<OPERATION>
No./Item
100 This selects the direct search dial operation.
SEARCH ENA 0000 DIAL :
For direct search dial operations.
0001 KEY :
Operation is not transferred to the search
mode unless the search button is pressed.
101 This sets the maximum speed for shuttle
operations.
SHTL MAX
0000 a8.4 : 8.4a normal speed
0001 a16 : 16a normal speed
0002 a32 : 32a normal speed
102 This sets the maximum speed for FF and
REW operations.
FF. REW MAX
0000 a16 : 16 (32)a normal speed
0001 a32 : 32 (60)a normal speed
0002 a50 : 50 (100)a normal speed
<Notes>
OThe speeds given in the parentheses apply in
the DVCPRO (25 Mbps), DV and DVCAM
mode.
OWith the DV/DVCAM format, the maximum
speed is set to 32a regardless of this item's
settings.
104 This selects whether to warn the operator
when the REF. VIDEO signal has not been
REF ALARM connected.
0000 OFF : Warning is not given.
0001 ON : Warning is given by the flashing
<Note>
Video and audio output may be disturbed when
the reference video signal is not input, so it is
recommended that a system which inputs the
reference video signal be used.
The underlined items indicates the initial setting.
Description
STOP lamp.
37 (E)
No./Item
105 This selects the VTR mode in which the EE
status is established when the MODE switch
AUTO EE SEL is set to EE.
0000 S/F/R : EE status is established in
STOP, FF, REW and EJECT modes.
0001 STOP : EE status is established in STOP
and EJECT modes.
0002 BLACK : EE status is established in STOP
and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes black and the sound is
muted when the tape is ejected.
0003 BLACK1 : EE status is established in
STOP, FF, REW and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes black and the sound is
muted when the tape is ejected.
0004 GRAY : EE status is established in STOP
and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes gray and the sound is
muted when the tape is ejected.
0005 GRAY1 : EE status is established in
STOP, FF, REW and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes gray and the sound is
muted when the tape is ejected.
106 This selects the EE mode output signals.
EE MODE SEL 0000 NORMAL :
Signals are output with a delay equivalent to
the length of internal signal processing.
0001 THRU :
Signals are output directly, without internal
processing, and so are output with no delay.
<Note>
When the unit is in edit mode and SDTI/1394 or
SG has been selected for the input signals by the
INPUT SELECT button, internal operations are
forcibly set to NORMAL.
107 This set the play delay time in frame
increments.
PLAY DELAY
0000 0
: :
0015 15
108 This selects the CAPSTAN LOCK mode.
CAP. LOCK 0000 2F : 2F mode
0001 4F : 4F mode
0002 8F : 8F mode
109 This selects whether to rewind the tape
automatically to the tape start when the tape
AUTO REW end is detected.
0000 OFF : The tape stops at the tape end.
0001 ON : The tape is rewound to the tape
Description
start.