Panasonic VQT9958 Operating Instructions Manual page 32

CONTENTS
Setup menus
Saving user files
1
Press the MENU button.
2
Press the REW button or FF button while holding
down the DIAG button to select the USER1 file.
3
Turn the search dial to move the cursor (2) on the
menu screen to No. A01 (SAVE).
S E T U P - M E N U
< U S E R 1 >
8 0 4 B L A N K L I N E
A 0 0 L O A D
2A 0 1 S A V E
A 0 2 P . O N L O A D
E N D
4
Turn the search dial while holding down the search
button to select the user file in which the contents
of USER1 are to be saved.Those user files which
have been set to the lock mode do not appear on
the display. If all the user files have been set to the
lock mode, the "LOCKED" display appears, and
the contents of USER1 cannot be saved into any of
the user files.
5
Press the SET button.
The following message appears on the menu
screen and counter display.
Menu screen
S E T U P - M E N U
U S E R 1 n U S E R 2 O K ?
Y E S < P L A Y > / N O < S T O P >
Counter display
The number of the user file selected in step
displayed at .
M E N U
N O . A 0 0 - 0 0 0 0
B L A N K
U S E R 2
U S E R 2
O F F
S A V E
4
is
32 (E)
6
Press the PLAY button.
The settings of USER1 are saved in the user file
4
selected in step and stored in the memory. If the
STOP button is pressed instead, the settings are
not changed, and the USER1 menu display
appears.
7
Turn the search dial to move the cursor (2) on the
menu screen to a number other than No. A00
(LOAD) or No. A01 (SAVE).
8
Press the SET button. The USER1 settings are
stored in the memory.
If the USER1 settings are not to be stored in the
memory, do not press the SET button but press the
MENU button instead.
Automatically recalling a user file
when turning on the power
If the user file to be loaded is selected in advance
using setup menu No. A02 (P.ON LOAD), the file will
be automatically loaded into USER1 when the power
is turned on.