Panasonic VQT9958 Operating Instructions Manual page 49

CONTENTS
Setup menus
USER menu
<AUDIO>
No./Item
734 This selects whether the operation of the
MONITOR SELECT button on the front panel
MONI SEL INH is to be enabled or disabled.
0000 OFF : Operation is enabled.
0001 ON : Operation is disabled.
0002 ON1 :
Operation is disabled in the FULL display
mode and enabled only in the FINE display
mode.
735 Although CUE is automatically output to the
monitor output in accordance with the
MON AUTO operation mode when a setting AUTO has
SEL been selected by setup menu item No. 721
(MONI CH SEL), the MON AUTO SEL setup
menu item is used to select the monitor
channel which is to be automatically switched
to CUE.
0000 L/R :
CUE is output to both the left and right
channels.
0001 L :
CUE is output to the left channel only.
0002 R :
CUE is output to the right channel only.
The underlined items indicates the initial setting.
<Concerning the CUE output in the search mode>
The table below shows how the CUE output to the monitor and main signal system outputs differs according to how the setup menu item
(No. 721, No. 731 and No. 735) settings are combined.
731 721
CUE OUT MONI CH MON AUTO
SEL SEL
MANU
OFF AUTO
PCM
MANU
AUTO
ON
PCM
<Notes>
21: PCM audio signal output is muted when the VTR is played
outside the –0.43 to +1 normal speed.
22: PCM audio signal output is muted when the VTR is played
outside the –10 to +10 normal speed.
When either AUTO is selected, the PCM audio signal is output
within –0.43 to +1 normal speed even in the automatic CUE
output mode.
Description
735
Monitor output
Lch Rch
SEL
----------
PCM PCM
21
L/R CUE CUE
CUE
PCM
L
R CUE
PCM
21
----------
PCM PCM
22
----------
PCM PCM
21
L/R CUE CUE
L CUE
PCM
R CUE
PCM
21
----------
PCM PCM
22
No./Item
738 This selects the function of the audio level
control knobs on the front panel.
AUDIO VR
SEL 0000
0001
<Note>
It is not possible to set it so that both the
recording level and playback level can be
adjusted.
When REC is selected, UNITY (fixed level) is set
for the playback level; when PB is selected,
UNITY is set for the recording level.
750 This selects the audio output level during DV
playback.
DV PB ATT
0000
0001
751 This selects whether to mute the sound where
recordings are joined during DV/DVCAM
REC PT MUTE playback.
0000
0001
Main signal system output
CH1 CH2
21
21 PCM PCM
21
22
PCM PCM
21 21
CUE CUE
CUE
PCM
21
CUE
PCM
21
PCM PCM
22
22
(L ch) (R ch)
23
23: The channel selected with the MONITOR SELECT L button on
the front panel is output.
24: The channel selected with the MONITOR SELECT R button on
the front panel is output.
49 (E)
Description
REC : This adjusts the recording level.
PB : This adjusts the playback level.
OFF : The audio output level is not
attenuated.
ON : The audio output level
attenuated (reduced).
OFF : The sound is not muted.
ON : The sound is muted.
CH3 CH4
PCM PCM
21 21
PCM PCM
21 21
CUE CUE
CUE
PCM
21
CUE
PCM
21
PCM PCM
22 22
(L ch) (R ch)
24 23
is
21
21
21
22
24