Video - Panasonic VQT9958 Operating Instructions Manual

CONTENTS
Setup menus
USER menu
<VIDEO>
No./Item
600 This selects the internal reference signal.
INT SG 0001 BB :
The black burst is generated.
0002 CB100 :
100% colour bars are generated.
0003 CB75 :
75% colour bars are generated.
601 This selects whether to float the vertical sync
position of the video output in order to align
OUT VSYNC the video output phase with the input in the
EE/record/edit modes.
0000 N-VF : Signals are not floated.
0001 VF : Signals are floated.
602 This selects whether to mute the video output
signals when a blank on the tape has been
V-MUTE SEL detected during playback.
0000 N-MUTE : No muting. (Freeze)
0001 LOW RF : Muting. (Set to gray.)
605 This selects the freeze mode for still pictures.
FREEZE SEL 0000 FIELD : Field freeze.
0001 FRAME : Frame freeze.
<Note>
When frame freeze has been selected, the frame
slow status is established with the slow setting.
606 This selects chroma colour killer processing
for the video output signals.
OUT C KILL
0000 B/W : No colour signals are output.
0001 COLOR : Colour signals are output.
609 This selects whether to superimpose EDH
onto the serial output signals.
EDH
0000 OFF : EDH is not superimposed.
0001 ON : EDH is superimposed.
<Note>
Even when ON is selected for this setting, EDH is
not superimposed onto the signals output from
the SDI OUT 3 connector if the SUPER switch on
the front panel of the unit is set to ON.
611 This selects Y/C separation processing for
the composite input signals.
YC SEP MODE
0000 B/W :
The signals are processed as B/W signals.
0001 AUTO :
The signals are automatically detected.
<Note>
When no optional board (AJ-YA932G) has been
installed, setup menu No. 611 is not displayed.
The underlined items indicates the initial setting.
Description
46 (E)
No./Item
618 This selects the interpolation operation.
Vertical interpolation is conducted automatically
INTERPOLATE during slow-motion playback to reduce the
vertical movement of the playback pictures.
However, this
interpolation operation to be forcibly turned off.
0000 OFF :
Interpolation is forcibly turned off.
0001 AUTO :
Interpolation is automatically turned on during
slow-motion playback.
620 This selects the operation mode for edge
subcarrier reduction (ESR) in the playback
ESR MODE circuit.
0000 OFF :
The mode is forcibly set to OFF.
0001 AUTO :
The mode is automatically set to ON or OFF
depending on the VTR operation.
Description
menu item enables the