Panasonic VQT9958 Operating Instructions Manual page 36

CONTENTS
Setup menus
USER menu
<BASIC>
No./Item
009 This sets the position of the characters on the
horizontal plane for the time code and other
CHARA H-POS super displays output to the VIDEO OUT 3/
SDI OUT 3 connector.
0000 0
: :
0004 4
: :
0016 16
<Note>
When setting this item, the DISPLAY SEL status
is output to VIDEO OUT 3/SDI OUT 3 even if
SUPER OFF has been set. However, when the
menu is exited, operation complies with the
SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO OUT
3/SDI OUT 3 according to the status set in the
menu.
010 This sets the position of the characters on the
vertical plane for the time code and other
CHARA V-POS super displays output to the VIDEO OUT 3/
SDI OUT 3 connector.
0000 0
: :
0023 23
: :
0028 28
<Notes>
OWhen setting this item, the DISPLAY SEL
status is output to VIDEO OUT 3/SDI OUT 3
even if SUPER OFF has been set. However,
when the menu is exited, operation complies
with the SUPER OFF/ON setting.
OWhen the DISPLAY SEL setting causes
characters to extend beyond the edges of the
screen, the setting value is changed so that the
characters are automatically displayed in a
position on the screen.
011 This selects the display type for the super
display output to the VIDEO OUT 3/SDI OUT 3
CHARA TYPE connector as well as for displays such as the
setting menu, etc.
0000 WHITE : White characters against a black
0001 W/OUT : White characters with a black
012 This sets the VTR's recording and playback
format.
SYS FORMAT
0000 50M :
DVCPRO50 (50 Mbps) is selected.
0001 25M :
DVCPRO (25 Mbps) is selected.
<Note>
The format complies with the setting of this menu
item when the tape is ejected.
The underlined items indicates the initial setting.
Description
background.
border.
36 (E)
No./Item
013 This sets the format in which the tape is to be
played back.
PB FORMAT
0000 MANUAL :
The format complies with the setting of setup
menu No. 012 (SYS FORMAT) when a
DVCPRO cassette is inserted.
The format complies to the format recorded on
the tape when a DV or DVCAM cassette is
inserted.
0001 AUTO :
The format complies with the format recorded
on the tape.
<Notes>
OWhen an editing mode has been selected, the
"MANUAL" setting is forcibly established for
internal operations.
OWhen AUTO has been selected, the picture
and sound may be disturbed until the format is
detected after a tape is loaded.
015 SD955 This sets whether the recorder is to be
forcibly set to the EE mode and the player's
MONI playback signals are to be output to the
CONTROL monitor by pressing the recorder's PLAYER
button when a monitor has been connected
only to the recorder during deck-to-deck
editing.
0000 MANU :
The recorder is not forcibly set to the EE mode.
0001 AUTO :
The recorder is forcibly set to the EE mode,
and the player's playback signals are output.
017 This selects the size of the characters for the
superimposed display output from the VIDEO
CHARA SIZE OUT 3 or SDI OUT 3 connector.
0000 NORMAL : Standard size
0001 LARGE : 4 times larger than the standard
<Note>
When LARGE has been selected, only time data
is displayed, regardless of the setup menu
No.008 (DISPLAY SEL) setting.
Description
size