JVC MX-J570V Service Manual page 23

Removing the cam unit
1. Remove the CD loading mechanism assembly.
2. While turning the cam gear "q", align the pawl "r"
position of the drive unit to the notch position(Fig.16) on
the cam gear "q".
3. Pull out the drive unit and cylinder gear(See Fig.17).
4. While turning the cam gear "q", align the pawl "s"
position of the select lever to the notch position(Fig.18)
on the cam gear "q".
5. Remove the four screws J retaining the cam unit(cam
gear "q" and cams R1/R2 assembly)(See Fig.18).
Chassis assembly
CN801
Fig.14
(See Fig.14 ~17 )
Tray select
switch board
CN802
CN804
Drive unit
Cylinder gear
Fig.16
Drive unit
r
I
Fig.15
J
Cams R1, R2 assembly
q
Cam gear
J
s
Select lever
Fig.17
MX-J570V/MX-J680V
q
Cam gear
Cam unit
J
1-23