Creating A New Mlc 62 Configuration; Before You Begin; Step One: Download Device Drivers - Extron electronics MLC 62 Series Setup Manual

Creating a New MLC 62 Configuration

Follow these steps to configure your MLC 62.

Before you begin

Connect the provided USB cable from your computer to the
Type mini B USB connector on the front panel (D models) or on
the left side panel (EU models), or connect an RS-232 cable from
your computer to the MLC's 3-pole Host/Config port.

Step one: download device drivers

Serial and IR drivers for your display devices are available free
from the Extron web site at www.extron.com.
To download device drivers:
1.
2.
Driver Subscriptions window
Click Start > Programs > Extron Electronics > MLC 62 or
double-click the MLC 62 software icon on your desktop
to launch the MLC 62 software application. The MLC62
Configuration Program window opens, with the Start
Options window displayed in front of it.
On the Start Options screen, click the Add Driver
Subscriptions button. The following window opens.
MLC 62 Series • Software Setup 3-3