Settings And Displays; Settings Mode - Siemens 7sg15 microtapp Operation Manual

9

Settings and Displays

The basic settings/displays flow diagram is shown in Figure 19. This diagram shows the main modes of display,
the Settings Mode, Instrument Display Mode and the Fault Data Display Mode. Intuitive operation of the push
buttons allows each mode to be entered where further menu options enable settings to be entered. At each level
a push button can be used to return to a higher menu level.
9.1

Settings Mode

For correct operation the MicroTAPP relay requires information regarding the network to which it is connected.
Information relating to the transformer characteristics, the tap changer, other transformers operating in parallel,
network parameters and voltage levels are entered as shown in Figure 20.
©2013 Siemens Protection Devices Limited
MENU
SETTINGS MODE
Figure 19
Figure 20
7SG15 MicroTAPP Description of Operation
INSTRUMENTS
FAULT DATA
Chapter 1 Page 27 of 38