Appendix B - Siemens 7sg15 microtapp Operation Manual

7SG15 MicroTAPP Description of Operation

Appendix B

MicroTAPP Rear View (E8 case)
MicroTAPP Rear View (E12 case)
Note that the identification letter at the top of the card, A, B, C, D, E, refers to its position within a particular case.
It does not refer to the card's functionality. This is instead specified by the functionality identifier at the bottom of
the card, AN1, I/O2, I/O1, PSU.
©2013 Siemens Protection Devices Limited Chapter 1 Page 36 of 38