Using The Obelisk Top2 Memory Card - Theben TR 610 top2 Operating Instructions Manual

hours exceeds the value set in the Service menu, SERVICE will
appear in the display.
Example: Replace a lamp after after 5,000 h.
Delete operating hours or set a higher value in Service (e.g.
†
¾
to 10,000 h)

Using the OBELISK top2 memory card

All functions can also be set on the PC using the OBELISK
software and transferred to the device via the memory card.
Insert memory card in the time switch
† ¾
Read in/out saved switching times and device setups in
†
¾
the time switch or start Obelisk program
Remove memory card after copying etc.
† ¾
!
Avoid mechanical overload and contamination during
storage/transport
L PC software OBELISK top2 available at
www.theben.de
16