Audio Menu - Panasonic AJ-D92P Operating Instructions Manual

Setup Menus

AUDIO menu

Item
Superimposed
No.
display
704 EMPHASIS
705 MONI SEL
706 REC CUE
730 DOUBLE REC
731 MONI OUT
732 LIMITER CH1
733 LIMITER CH2
734 LIMITER CH3
735 LIMITER CH4
736 MIC LOWCUT
CH1
737 MIC LOWCUT
CH2
738 MIC LOWCUT
CH3
739 MIC LOWCUT
CH4
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
0000 OFF For setting the emphasis ON or OFF.
0001 ON
For setting the audio signals which are to be output from the AUDIO OUT
connectors (PHONO), HEADPHONE jack and EARPHONE jack during
PLAY (FWD a1).
0000 PLYPCM 0: PCM audio signals are output.
0001 PLYCUE 1: Cue audio signals are output.
For setting the audio input signals which are to be recorded on the cue
track.
0000 CH1 0: CH1 input signals are recorded.
0001 CH2 1: CH2 input signals are recorded.
0002 CH1+2 2: CH1 and CH2 input signals are mixed and recorded.
For setting whether the CH1 and CH2 input signals are to be recorded
simultaneously on CH3 and CH4.
(This item is valid only in the 50 Mbps mode.)
0000 OFF 0: The signals are not recorded simultaneously.
(The CH3 and CH4 inputs signals are recorded on CH3 and CH4.)
0001 ON 1: The signals are recorded simultaneously.
For setting the audio signals to be monitored at the AUDIO OUT connectors
(PHONO) when PLYPCM has been selected as the No. 705 setting.
The cue audio signals are always output when PLYCUE has been selected
as the No. 705 setting.
0000 CH1 0: The audio signals of CH1 are monitored.
0001 CH2 1: The audio signals of CH2 are monitored.
0002 CH3 2: The audio signals of CH3 are monitored.
0003 CH4 3: The audio signals of CH4 are monitored.
0004 CH1+2 4: The audio signals of CH1 and CH2 are mixed and monitored.
0005 CH3+4 5: The audio signals of CH3 and CH4 are mixed and monitored.
For setting the CH1 audio limiter operation.
0000 OFF 0: The limiter does not operate.
0001 ON 1: The limiter operates.
For setting the CH2 audio limiter operation.
0000 OFF 0: The limiter does not operate.
0001 ON 1: The limiter operates.
For setting the CH3 audio limiter operation.
0000 OFF 0: The limiter does not operate.
0001 ON 1: The limiter operates.
For setting the CH4 audio limiter operation.
0000 OFF 0: The limiter does not operate.
0001 ON 1: The limiter operates.
0000 OFF For setting the high-pass filter of the CH1 microphone ON or OFF.
0001 ON
0000 OFF For setting the high-pass filter of the CH2 microphone ON or OFF.
0001 ON
0000 OFF For setting the high-pass filter of the CH3 microphone ON or OFF.
0001 ON
0000 OFF For setting the high-pass filter of the CH4 microphone ON or OFF.
0001 ON
51
Description of setting