Preparations
<Note>
This unit must be placed either on a level surface or
upright for use.
It may not work properly if placed in any other
position.
Flat
Preparing to supply power
1. When using an AC adapter
Use the dedicated AC adapter (AJ-B75: optional
accessory).
<Notes>
O Switch off the unit's power before using the AC
adaptor.
O Connect the AC adapter's power cord last of all.
1
Connect the AC adapter's DC cable to the DC
IN socket on the unit.
2
Connect the AC adapter's power cord, and set
its power switch to the ON position.
3
Set the POWER switch on the unit's front panel
to ON.
Upright
AC adapter
(AJ-B75)
17
DC IN connector
POWER switch
Power switch