Reading And Displaying The Time Data - Panasonic AJ-D92P Operating Instructions Manual

Playback
5. Reading and displaying the time
data
The recorded time code and user's bit are read by the
built-in time code reader during tape playback.
The time data which is read out can be displayed on
the status display window or monitor screen.
Displaying the time data on the status
display window
The time data to be displayed is selected by the TCG
selector switch and DISPLAY switch positions.
What time data is to be displayed is determined in two
stages: first by the position selected by the TCG
selector switch, and second by the position of the
DISPLAY switch.
Status display window
DISPLAY switch
TCG selector DISPLAY switch
switch position position
TC or CTL
SET
F-RUN or R-RUN
TCG selector switch
Data displayed
Time code
UB User's bit
CTL CTL
TC Time code
UB User's bit
Displaying the time data on the monitor
screen
When the time data is displayed in the status display
window, connect the monitor's input connector to the
VIDEO OUT 2 connector, and set the SUPER
IMPOSE switch to ON.
The time data will now be displayed on the monitor
screen.
SUPER IMPOSE switch
Outputting the playback time code from
the TC OUT connector
When the unit is in the playback mode, the playback
time code is output.
TC OUT connector
37
VIDEO OUT 2 connector