Table of Contents
Advertisement
Specifications
[AUDIO]
Headroom:
20 dB
Emphasis:
T1 = 50 µs, T2 = 15 µs (ON/OFF switchable)
[INPUT/OUTPUT CONNECTORS]
$ Input connectors
VIDEO IN:
BNCa1, 1.0 V [p-p], 75 Ω
AUDIO IN:
O LINE:
XLR (3-pin)a4 (CH1, CH2, CH3, CH4)
–60/+4 dBu switchable
–60 dBu, 3 kΩ/+4 dBu, high impedance
(Switchable to 600 Ω using internal switch)
Phantom mic power supply (+48 V) ON/OFF
selectable when –60 dBu is selected
(Switchable to +12 V using internal switch)
O CAM:
Multi (26-pin), –60 dBu, 3 kΩ
CAMERA:
Multi (26-pin) a1
COMPOSITE IN: 1.0 V [p-p], 75 Ω
1.0 V [p-p], 75 Ω
Y:
0.7 V [p-p], 75 Ω
PB:
0.7 V [p-p], 75 Ω
PR:
(75 % color bar, 7.5 % setup added)
TC IN:
BNC a1, 0.5 V to 8.0 V [p-p], 8 kΩ
$ Output connectors
VIDEO OUT 1/2:
BNC a2, 1.0 V [p-p], 75 Ω
(Superimposed displays ON/OFF selectable for
VIDEO OUT 2)
Monitor VIDEO:
PHONO a1, 1.0 V [p-p], 75 Ω
AUDIO OUT:
XLR (3-pin) a4 (CH1, CH2, CH3, CH4)
+4 dBu low impedance
PHONO a1, –20 dBu, low impedance
TC OUT:
BNC a1, 2.0 V [p-p], low impedance
PHONES:
M6 a1, M3 a1
Stereo, 8 Ω, CH1/CH2 and CH3/CH4
switchable, playback control supported
[INPUT/OUTPUT CONNECTORS]
$ Other input/output connectors
DC IN:
XLR (4-pin) a1 (DC 11 V – 17 V)
DC OUT:
4 pins a1 (DC 11 V – 17 V)
Maximum rated current: 200 mA
REMOTE:
D-sub, 9 pins (female) a1 (for AJ-A95)
RS-422A interface standard complied with (no
editing functions)
[LCD DISPLAY TUBE]
$ Status display window
Counter:
8 digits (CTL/TC/UB switchable)
Warning displays:
RF, SERVO, HUMID, SLACK
Operating status:
DF, SLAVE, TCG, WIDE
Remaining tape, battery charge:
Segment display
$ Signal level display window
Audio level display/input video signal level display
switchable
16 steps + channel condition display
[OPTIONAL EXTRAS]
O Battery pack
AU-BP402
O AC adapter
AJ-B75
O 9-pin remote controller
AJ-A95
O 9-pin remote cables
AU-C5 (5 meters), AU-C10 (10 meters)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
62
Advertisement
Table of Contents
