Start Time - Panasonic NV-F65EA Operating Instructions Manual

EC
THE PRESENT TIME (CONT'D)
Preparation
•Slide down the Mode Selector Cover on the Remote
Controller so that the Bar Code Reader Display can be
seen.
•Press the Digital Scanner On/Off Button to turn it "ON".
O
Trace
the bar code "SETTING OF THE CLOCK".
© Trace the bar code tor the year (YEAR).
r
S3
YEAR
135,1=3 11
\
V
0 Trace the bar code for the month (MONTH).
C
>
MONTH
© Trace the bar code
for
the day of the month
(DATE).
© Trace the bar code for the hour (START TIME).
@START TIME
i
0 Trace the bar code for the minute (MIN).
Q Press the Transmit Button (Remote Controller) and
then confirm that the time is displayed in the
Multi-Function Display of the VTR.
nn
uu
0
Press the Digital Scanner On/Off Button to turn it
"OFF'.
•If the transmission was not received correctly, the
"Beep-Beep, Beep-Beep" sound from the VTR will warn
you. In this case, perform transmission again.
• If the Remote Controller is left with no operation per¬
formed for more than 4 minutes, it will automatically switch
over to the power-saving standby condition and the lamp
in the reading tip goes out. (In this case, bar codes that
have already been read (but not yet transmitted to the
VTR) will be cancelled.
•The bar codes "SETTING OF THE CLOCK", "YEAR" and
"MONTH ' are located on page 3 of the Programming
Sheet.
(
12
)