3. Software specifications
1) Protocol
(1) Communication parameters
Communication system
Communication speed
Bit length
Stop bit
Parity bit
ACK code
The underlining indicates the factory settings.
Any changes to the settings can be made using the set-up menu items listed below.
Communication parameter
Communication speed
Bit length
Stop bit
Parity bit
ACK code
Asynchronous, full duplex
300/600/1200/2400/4800/9600
7 bit/8 bit
1 bit/2 bit
NONE/ODD/EVEN
ACK code returned/ACK code not returned
<Note>
The ACK code is what is returned from the VTR to the
controller when data has been successfully sent from the
controller.
Set-up menu item
No. 205 BAUD RATE
No. 206 DATA LENGTH
No. 207 STOP BIT
No. 208 PARITY
No. 209 RETURN ACK
–E-7–