Panasonic AJ-D650 Operating Instructions Manual page 63

VTR
Send command
operation
SHTL
[STX] OSF:data [ETX]
FORWARD
data = n: speed data
0: STILL
1: ×0.03 (DVCPRO), ×0.03 (DV, DVCAM)
2 : ×0.1 (DVCPRO), ×0.1 (DV, DVCAM)
3 : ×0.2 (DVCPRO), ×0.3 (DV, DVCAM)
4 : ×0.5 (DVCPRO), ×0.5 (DV, DVCAM)
5 : × 1 (DVCPRO), ×1
6: ×1.85 (DVCPRO), ×1.85 (DV, DVCAM)
7 : ×4.1 (DVCPRO), ×3.1 (DV, DVCAM)
8 : ×9.5 (DVCPRO), ×9.5
9 : ×16 (DVCPRO), ×16
A : ×32
SHTL
[STX] OSR:data [ETX]
REVERSE
data = n: speed data
0: STILL
1: ×0.03 (DVCPRO), ×0.03
2: ×0.1
3: ×0.2
4: ×0.5
5: ×1
6: ×1.85 (DVCPRO), ×1.85 (DV, DVCAM)
7: ×4.1
8: ×9.5
9: ×16
A: ×32
STANDBY
[STX] OBF [ETX]
OFF
STANDBY
[STX] OBN [ETX]
ON.
Return (completion)
message
[STX] OSF [ETX] This is the forward direction shuttle command.
(DV, DVCAM)
(DV, DVCAM)
(DV, DVCAM): This speed differs according to the setting
(DVCPRO), ×32 (DV, DVCAM): This speed differs according to the setting
[STX] OSR [ETX] This is the reverse direction shuttle command.
(DV, DVCAM)
(DVCPRO), ×0.1 (DV, DVCAM)
(DVCPRO), ×0.3 (DV, DVCAM)
(DVCPRO), ×0.5 (DV, DVCAM)
(DVCPRO), ×1 (DV, DVCAM)
(DVCPRO), ×3.1 (DV, DVCAM)
(DVCPRO), ×9.5 (DV, DVCAM)
(DVCPRO), ×16 (DV, DVCAM): This speed differs according to the setting
(DVCPRO), ×32 (DV, DVCAM): This speed differs according to the setting
[STX] OBF [ETX] This command is for setting the VTR to standby OFF.
[STX] OBN [ETX] This command is for setting the VTR to standby ON.
– E-11 –
Supplementary notes
selected for set-up menu No.101 (SHTL
MAX).
selected for set-up menu No.101 (SHTL
MAX).
selected for set-up menu No.101 (SHTL
MAX).
selected for set-up menu No.101 (SHTL
MAX).