Connect The Download Cable To The Host Pc - ICP DAS USA I-7188XB Series User Manual

2.2 Connect the Download Cable to the Host PC

Step 1: Connect the CA0910 download cable between COM1 of the
I-7188XB(D) and the COM Port of the Host PC, as shown in the
diagram below.
Step 2: Apply power (Vs+, GND) to the I-7188XB(D). Vs+ can be in a
range from +10V to +30V DC.
Connect to the COM
Port of Host PC
Connect to the
Power supply
Step 3: After applying the power, the 5-digits of the 7-SEG LED will
continuously show as follows.
If the non-display version of module is being used, please
continue to the next step.
Step 4: Check that the red LED continuously blinks one times and wait
for one second to next cycle. The diagram show as follows:
I-7188XB Series User's Manual(Ver.1.0, Apr/2007, 7MH-020-10 ) --- 21
GND
CA0910
TXD
RXD
Vs+
GND
5-digit 7-SEG LED
Hour Minute
Red LED
Second