Processor Specifications; Psu Specifications; System Battery Specifications; Expansion Bus Specifications - Dell PowerEdge R430 Owner's Manual

Table 19. Chassis weight
System
PowerEdge R430

Processor specifications

The PowerEdge R430 system supports up to two Intel Xeon E5-2600 v3 or Intel Xeon E5-2600 v4
product family processors.

PSU specifications

The PowerEdge R430 system supports up to two AC redundant power supply units (PSUs) and a single
AC cabled PSU.
Table 20. PSU specifications
PSU Class
550 W AC Platinum 2107 BTU/hr
450 W AC Bronze
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase-to-phase
voltage not exceeding 230 V.

System battery specifications

The PowerEdge R430 system supports 3 V CR2032 Lithium coin cell system battery.

Expansion bus specifications

The PowerEdge R430 system supports PCI express (PCIe) Generation 2 and 3 expansion cards, which
need to be installed on the system board using expansion card risers. This system supports two types of
expansion card risers. The following table provides the expansion card riser specifications:
Table 21. Expansion card riser specifications
Expansion card riser PCIe slots on the
PCIE_G3_X16 riser
PCIE_G3_X8 riser
Maximum weight (with all hard drives/SSDs)
19.9 kg (43.87 lb)
Heat Freque
dissipation ncy
(maximum)
50/60
Hz
1871 BTU/hr 50/60
Hz
Height
riser
Slot 1 low-profile
Slot 2 low-profile
Slot 1 full-height
Slot 2 low-profile
Voltage
100–240 V AC,
autoranging
100–240 V AC,
autoranging
Length
half-length
half-length
half-length
half-length
Current
7.4 A-3.7 A
6.5 A-3.5 A
Link
x16
x16
x8
x8
37