Siemens SINAMICS V20 Compact Operating Instructions page 4

Outline dimensions
(Unit: mm/inch)
Height of frame sizes with fan(s)
1)
Depth inside the cabinet for push-through mounting
2)
Depth of Flat Plate inverter (400 V 0.75 kW variant only)
3)
Drill patterns
(Unit: mm)
For FSAA/FSAB, you only need to drill these two holes for cabinet mounting.
1)
For push-through mounting only.
2)
For more information about the push-through mounting and the installation of the Flat Plate inverter, see the SINAMICS V20
Inverter Operating Instructions.
4
W
FSAA 68/2.7
FSAB 68/2.7
FSA 90/3.5
FSB 140/5.5
FSC 184/7.24
FSD 240/9.4
FSE 245/9.6
W H
FSAA/FSAB 58 132
FSA 79 140
FSB 127 135
FSB 125 108
2)
FSC 170 140
FSC 170 116
2)
FSD 223 166
FSD 223 142
2)
FSE 228 206
FSE 228 182
2)
H H1
1)
142/5.6 -
142/5.6 -
150/5.9 166/6.5
160/6.3 -
182/7.17 -
206.5/8.1 -
216/8.5 264.5/10.4
W1 H1 H2 Ø
- - - 4.6
- - - 4.6
- - - 4.6
118 172 45.5 4.6
- - - 5.8
161 197 61 5.8
- - - 5.8
214 222 59 5.8
- - - 5.8
219 282 83 5.8
D
107.8/4.2
127.8/5
145.5 (114.5 )/5.7(4.5 )
3) 3)
164.5/6.5
169/6.7
172.5/6.8
209/8.2
Screw Tightening torque
2 × M4 1.8 Nm ± 10%
4 × M4 1.8 Nm ± 10%
4 × M4 1.8 Nm ± 10%
4 × M4 1.8 Nm ± 10%
4 × M5 2.5 Nm ± 10%
4 × M5 2.5 Nm ± 10%
4 × M5 2.5 Nm ± 10%
4 × M5 2.5 Nm ± 10%
4 × M5 2.5 Nm ± 10%
4 × M5 2.5 Nm ± 10%
SINAMICS V20 Inverter
A5E37281078-003, 05/2016
D1
2)
-
-
-
106/4.17
108/4.25
98/3.9
118.5/4.7