Motion Set
Motion Set
This submenu allows you to change the settings for the DVR Combo's pixel-based motion
detection.
1. MOTION RECORD - Sets the Motion Recording
to ON/OFF. Navigate to this option using the
buttons, and press the
option.
2. MOTION RECORD DURATION - Sets the length
of time for the recording once motion detection has
been detected. Navigate to this option using the
buttons, and press the
the option to one of the following settings: OFF /
10 / 20 / 30 / 40 / 50 and 60 seconds.
3. CHANNEL1 - CHANNEL4 - Sets the Channel to
ON/OFF for recording Motion. Navigate to this
option using the
button to change the option.
4. SENSITIVITY - Sets the sensitivity for Motion
Detection from 0 (low sensitivity) to 12 (high
sensitivity). Navigate to this option using the
buttons, and press the
option.
20
button to change the
button to change
buttons, and press the
button to change the
MOTION
MOTION RECORD
MOTION RECORD DUR.
CHANNEL1
CHANNEL2
CHANNEL3
CHANNEL4
SENSITIVITY
[
]MOVE [ ]SELECT [
[ ON ]
[ 10 SEC]
[ N]
[ Y ]
[ N ]
[ N ]
[ 3 ]
]EXIT