Page 1
15” COLOR LCD DVR COMBO SURVEILLANCE SYSTEM WITH INTERNET REMOTE VIEWING INCLUDES 4 NIGHT VISION CAMERAS Instruction Manual English Version 1.0 MODEL: SG15OD2844161 www.lorexcctv.com Copyright (c) 2006 LOREX Technology Inc.
Page 2
Thank you for purchasing the 15” LCD-DVR Combo System. Lorex is committed to providing our customers with a high quality, reliable security product. The LOREX SG15OD2844161 Networkable Surveillance System is a slim, lightweight 15” LCD Security Monitor with a built in 4-channel Digital Video Recorder. High resolution images are recorded to the included 160 GB Hard Drive.
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment.
Page 4
Important Safeguards Service 13. Servicing - Do not attempt to service this video 19. Cleaning - Unplug the video product from the wall equipment yourself as opening or removing covers outlet before cleaning. Do not use liquid cleaners or may expose you to dangerous voltage or other aerosol cleaners.
4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked 5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, antenna, and cables to protect the unit from electrical surge LOREX TECHNOLOGY INC. http://www.lorexcctv.com...
Page 6
Monitor Features Monitor Features • High Resolution 15” LCD Monitor with Built-in DVR • Network Interface for Remote Viewing over the internet * • Ultra Sharp image reproduction with High Contrast Ratio • Quad Technology allows for viewing of 4 cameras simultaneously •...
DVR Features DVR Features • High quality recording using advanced MJPEG video compression (5~20Kbyte/frame) • Long lasting 160 GB Hard Drive included, supports up to 250 GB • Automatic Overwrite available when disk is Full • Password Security Protected • Built-in Video motion detection supports 12 levels of sensitivity •...
Table of Contents Table of Contents Getting Started ..................9 SG15OD2844161 - Front Monitor Controls ..........10 SG15OD2844161 - Side / Back Connections ......... 11 Remote Control ..................12 Installing Cameras .................. 13 Connecting Cameras ................14 Starting the System - Self Test Screens ..........15 Starting the System - QUAD Display ............
Getting Started Getting Started The SG15OD2844161 system comes with the following components: 15” Color 4 Channel Monitor with 4 x 1/4” CCD Color IR Day/Night Built-in DVR Cameras (with Removable Sunshade) 4 x Camera Ethernet Standard Power Cable Cables (57’ Length)
SG15OD2844161 - Front Monitor Controls SG15OD2844161 - Front Monitor Controls The controls on the Front Panel of the DVR are for the Monitor Display only, and do not control any of the Observation System or DVR functions. 1. MENU - Accesses the menu controls for the MONITOR SETTINGS ONLY. Includes settings for...
SG15OD2844161 - Side / Back Connections SG15OD2844161 - Side / Back Connections 1. I/O SWITCH - Turns the unit power ON/OFF 2. VGA IN PORT - Connection Port for VGA Input (i.e. PC Connection) 3. RS485 PORT - Port for connecting a PTZ Camera with PELCO-D Protocol.
• CH - Change between CH1 - CH4 • Z IN - Zoom In • Z OUT - Zoom Out • - Change Camera view Up/Down and Left/Right NOTE: PTZ Camera is an optional system add-on, and is not included with the SG15OD2844161 DVR Combo Unit.
Installing Cameras Installing Cameras The SG15OD2844161 Observation System includes 4 - 1/4” CCD Color IR Day/Night Indoor/ Outdoor Cameras* INFRA-RED LEDs - Provides illumination for low light conditions INPUT CABLE (BACK) - Delivers Video / Audio / Power from the Observation...
Connecting Cameras Connecting Cameras The SG15OD2844161 Observation System includes 4 x 1/4” Color CCD DIN Cameras. DIN Connected Cameras 4 x 1/4” COLOR CCD DIN cameras OBSERVATION SYSTEM are included with the Observation System. These cameras have a single cable, and receive power directly from the Observation System.
Starting the System - Self Test Screens Starting the System - Self Test Screens Once the DVR Combo has been connected and powered on, the following self-test screens will appear: NOTE: This unit includes a 160GB Hard Drive. MASTER HDD *************** STANDALONE DVR SLAVE HDD ...
Starting the System - QUAD Display Starting the System - QUAD Display After the system self-tests have been completed, the System will switch to the CAMERA viewing screens (in QUAD MODE) with the following information displayed on screen: • ALARM [----]: Shows CAMERAS in ALARM mode •...
Main Menu Control Main Menu Control Enter the MENU screen by pressing the MENU button on the Remote Control. Scroll through the 7 options by pressing the UP and DOWN buttons. To enter a sub-menu, navigate to the option and press the ENTER BUTTON (QUAD/ENTER). To exit a SUBMENU, press the MENU button, which takes you back to the MAIN MENU.
Time / Date Set Time / Date Set This submenu allows you to change the TIME and DATE displayed on the monitor (On Screen Display), and recorded on the DVR. 1. DATE FORMAT - Display the DATE FORMAT on the monitor screen. Navigate using the buttons, and press the button to set the date TIME/DATE...
Schedule Set Schedule Set This submenu allows you to set an automatic recording schedule for the DVR 1. SCHEDULE - Sets the scheduled recording to ON/ OFF. Navigate to this option using the TIME/DATE buttons, and press the button to change the option.
Motion Set Motion Set This submenu allows you to change the settings for the DVR Combo’s pixel-based motion detection. 1. MOTION RECORD - Sets the Motion Recording MOTION to ON/OFF. Navigate to this option using the buttons, and press the button to change the option.
Record Set Record Set This submenu controls the RECORDING settings for the DVR. 1. RECORD MODE - Configures the recording type. Navigate to this option using the buttons, and press the button to change the option: RECORD • EACH - In EACH mode, the system records the video images from the 4 cameras separately.
Advanced Menu Set Advanced Menu Set You will need to enter the master password (111111) to enter the Advanced Menu settings 1. CHANGE PASSWORD - Allows you to change the password for the DVR. Navigate to this option ADVANCED MENU using the buttons, and press the button to...
System Information System Information This submenu displays information about the Hard Drives in the DVR. 1. HDD CAP DISPLAY - Sets the Hard Drive Capacity on screen display to ON/OFF. Navigate to this option using the buttons, and press button to change the option to either ON or SYSTEM INFORMATION OFF.
DNS Server. You may need to set this value manually. The current server address is: • 222.231.024.028 (completes by default if all options above are set to YES) If this Address does not work, you may need to call LOREX CCTV for Technical Assistance.
Network Network 5. DDNS - The DDNS Value will automatically be completed when GET DDNS is set to YES. To NETWORK manually set this value, navigate to this option using the buttons, and press the button to access the DDNS Submenu. Use the CLIENT ACCESS [ YES] keys to change the values, and...
Recording Functions Recording Functions The SG15OD2844161 DVR Combo has 3 available recording types: Manual, Schedule, Motion or Sensor. • Motion: Recording starts when Motion is detected from a Camera input. Motion Recording is configured through the Motion Menu options. Refer to Page 21 for more details.
Recording - On screen Messages Recording - On screen Messages • ALARM: Displays the current Alarm Configuration for all channels. In the above image, 1 indicates that Channel 1 is in ALARM, Channel 2 is NOT Configured for Alarm mode, and Channels 3 and 4 are NOT in ALARM mode.
Search Functions - Event Search Search Functions - Event Search Press the EVENT button on the Remote Control to access the Recorded Events by: • Total Event - Displays all recorded event types EVENT SEARCH MASTER HDD • Scheduled Event - Displays Scheduled recording TOTAL EVENT SCHEDULE EVENT...
Search Functions - Time Search Search Functions - Time Search Press the TIME button on the Remote Control to access the Recorded Events by time. TIME SEARCH MASTER HDD - START-END TIME 2006/05/01 22:15:23 - 2006/05/20 13:45:28 2006 YEAR MONTH DATE HOUR ]MOVE [...
PTZ (Pan/Tilt/Zoom) Control PTZ (Pan/Tilt/Zoom) Control The DVR supports PTZ Mode, however this will only work with PELCO-D Protocol PTZ type cameras Press the PTZ button on the remote control to enter PTZ Mode The following buttons are used to Control a camera in PTZ mode: •...
NetViewer - Installation Requirements NetViewer - Installation Requirements The NetViewer software (included with the DVR) has the following installation requirements. Minimum System Requirements: Operating System Windows 2000 Windows XP Home Edition Windows XP Professional Processor .Pentium 4 - 1.5 GHz Processor (or equivalent) Memory 256 MB RAM Hard Drive...
Network Connectivity Network Connectivity The SG15OD2844161 DVR Combo can be remotely controlled using your existing network and the provided NetViewer software. 1. Connect the DVR Combo to the Router using the supplied Ethernet Cable. Power the Observation unit NOTE: The System must be connected to the router prior to powering on the system.
Router Port Forwarding Router Port Forwarding You will need to enable port forwarding on your Router to allow for external communications with your DVR. Enable port forwarding on: • Port 14337 • Port 14338 Computers, DVR’s, and other devices inside your network can only communicate directly with each other within the internal network.
LCD/DVR Specifications - Appendix #1 LCD/DVR Specifications - Appendix #1 Monitor / DVR Specifications Resolution 1,024 x RGB x 768 Luminance (cd/m2) Color Saturation (%) Contrast Ratio 450:1 Response Time (ms) 160 GB (installed) Real Time OS (RTOS) Video Input 6 Pin DIN (x4) / NTSC or PAL Video Output Composite Video (RCA x 1)
Weather Proof Rating IP44 Operating Humidity 90% RH max. As our products are subject to continuous improvement, LOREX Technology Inc. and its subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE...
The unit will make an audible alert when powered back on, and the screen should display the loading diagnostic messages Problem: The remote control has been lost or misplaced. • Call LOREX Customer Support for assistance The available buttons on the front of the DVR Combo unit will not access the Menu system.
Page 38
Troubleshooting Problem: There is no picture appearing on a Channel / Camera • Check the CAMERA connections to the DVR (Audio and Video) • Check that the monitor being used has sound capabilities • Disconnect and reconnect the cable at the DVR and at the Camera •...
Page 39
It’s all on the web Product Information Specification Sheets User Manuals Software Upgrades Quick Start Guides Firmware Upgrades VISIT www.lorexcctv.com wwwlorexcctv.com Strategic Vista International Inc.