Oki LD670 User Manual page 117

5. Select "DEFAULT SET" as your option.
Press and hold down the FEED switch for at least one second to accept the
selection.
The printer prints the following upon your acceptance of
"DEFAULT SET" selection:
Note: If you turn off the printer power switch without first selecting "END", your
settings will be lost.
- Verifying your settings
To verify your settings, execute a test print as described in Section 10-1.
The test printing prints a list of printer settings. Check the list to verify your
settings.
Setup
End
Default Set
Setup Print
Setup
Selection Item
Clear Completed
115