General Specifications (Structure) - Toshiba T300MVi MEDIUM VOLTAGE Instruction Manual

General Specifications (Structure)

The general specifications (structure) of the equipment are shown in the following table.
General Specifications (Structure)
Item
Applicable standard
Ambient Temperature 0 to 40°C
conditions
Humidity
Altitude
Installation
location
Vibration
Corrosive
factors
Paint color Cubicle
surface
Cubicle structure
Cubicle protective
structure
Air filter
Standard specification
UL, NEMA
Max 95%, no condensation
1000 m Max. above sea level
Indoors
10 to 50 Hz, 0.5 G or less
Hydrogen Sulfide (H S)
2
Sulfur Dioxide (SO ) 0.05 PPM
2
Chlorine gas (Cl ) 0.1 PPM
2
Ammonia gas (NH ) 0.1 PPM
3
Nitrogen Dioxide (NO )
2
Nitrogen Oxide (NOx) 0.02 PPM
Ozone (O ) 0.002 PPM
3
Hydrochloric acid mist (HCl
ANSI 61 Gray
Front maintenance,
stand-alone cubicles
NEMA 1,
Forced ventilated
With channel base
Front mounted
Additional optional
specification
0.001 PPM
0.02 PPM
3
) 0.1 mg/m
1
Consult factory for
optional colors
- 13
Remarks
At no time should
the drive be
subjected to
conditions that
would allow
condensation to
form on the
components.
This is a list of
corrosive agents
know to attack
the drive
components.
Other agents
may also have
adverse effects
on the drive.