Panasonic Section750 User Manual page 12

1. Understanding Your Phone
# Feature
5
Soft Keys Used to select speed dial directories or numbers.
PROG Key Used to program Flexible Function (FF) and one-
6
touch keys, to adjust ringer volume, and to send a
flash signal. Depending on the setup of your sys-
tem, may also be used to transfer calls.
CONF Key Used to establish conference calls and to check FF
7
key and one-touch features.
8 One-Touch Keys Used to make outside calls or to access system fea-
tures.
Flexible Function (FF) Used to access outside lines or to access system fea-
9
Keys tures.
10 DND/CF Indicator Indicates that Do-Not-Disturb (DND) or Call For-
warding is set.
INT Indicator Lights when you are on a call and flashes when you
11
hold a call.
MIC Indicator Indicates that your voice is not muted (i.e., party on
12
the other end can hear you). Goes off when your
hands-free microphone is muted and flashes when
your handset is muted.
13
ON/OFF Indicator Lights when the ON/OFF key has been pressed.
FL/R Key Used to end an outside call and to either restore out-
14
side dial tone or switch to external dial tone status
without hanging up the receiver.
15
REDIAL Key Used to redial the last number dialled.
16
MEMORY Key Used to access speed dialling or enter account
codes.
ON/OFF Key Used to make a call without lifting the handset or to
17
turn the speaker on and off.
18
LINE Key Used to seize a free outside line.
VOLUME Key Used to adjust the level of tones, background
19 music, ringing, receiver volume, and display con-
trast.
HOLD Key Used to hold calls, to retrieve held calls, and to
20
complete FF key programming.
Microphone Used to talk to another party without using the
21
handset.
22
Speaker Outputs tones and voice at your extension.
12 ICX (International), issued March 1999
Description
ICX-35-750