Panasonic Section750 User Manual page 24

2. Setting Up Your Phone
4. Dial the phone number to be stored.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
To assign an SSD number to a one-touch key
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Press the MEMORY key.
5. Enter the SSD bin number to be programmed.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To assign a feature code or extension number to a one-touch
Note: **When the system is set up for MCO Code level, one-touch keys
automatically dial an outside line. (MCO Code level requires system programming.)
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. **If the feature functions at the MCO Code level, press MEMORY * #.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To check a programmed one-touch key
Note: This task requires a display phone.
1. Pickup the handset or press the ON/OFF key.
2. Press the CONF key.
24 ICX (International), issued March 1999 ICX-35-750