Changing The Default Display; Understanding Display Information - Panasonic Section750 User Manual

Changing the Default Display

The MODE key enables you to change the software mode of the display from
Default Mode (i.e., time and date) to Directory Mode (i.e., System Speed Dial
[SSD], Personal Speed Dial [PSD], or Extension directories). The END key enables
you to return the display to Default Mode.
While in Directory Mode, the soft keys enable you to view either the SSD, PSD, or
Extension directories. After selecting the desired directory, the soft keys also enable
you to either view or dial speed dial or extension numbers. (For more information on
using directories to make calls, see "Dialling Speed Dial Numbers" on page 38 and
"Calling Other Extensions" on page 51.)
While in Variable Mode, you can also use the soft keys to access various system
features.
Notes:
• You must be in Directory Mode to view speed dial and extension directories or
dial speed dial numbers using the soft keys.
• The system features displayed in Variable Mode require system programming.
To display the Directory Mode on a small-display phone
1. (A)Press the MODE key one time to access the speed dial directories. (66'
and 36' appear on the second line of the display.)
OR
(B) Press the MODE key twice to access the Extension Directory. ((;7 appears
on the second line of the display.)
2. Press the END key to return to Default Mode.

Understanding Display Information

Display information indicates the status of the phone. However, this information
will vary depending on how the phone is programmed and its status. Several of the
more common displays are illustrated below.
Figure 3. Idle condition for small-display phone (display default)
###4:#####0$5#####:HG ################43=67
446
Extension
ICX-35-750 ICX (International), issued March 1999
1. Understanding Your Phone
#
######%UDQG\
User name
13