Panasonic Section750 User Manual page 30

2. Setting Up Your Phone
Note: You need to know the PSD bin number for PSD number in order to assign a
name to it. To determine the bin number, see "Checking Speed Dial Numbers" on
page 40.
To assign a name to a PSD number
Note: This task requires a display phone.
1. Pick up the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 0 for the Name Assignment mode.
5. Press the VOLUME key until the desired PSD bin number (80-99) is displayed.
6. Press the FL/R key to clear the current/default data.
7. (A) For a small-display phone (see Figure 17 on page 31 for an example):
a. Press the appropriate one-touch key for the desired group of letters.
b. Use the bottom row of FF keys to define your selection.
c. Repeat steps a-b as many times as necessary to enter the desired name.
• Press the * key to erase an entry.
• Press the # key to enter a space.
(B) For a large-display phone (see Figure 18 on page 32 for an example):
a. Press the appropriate soft key next to the desired row of letters.
b. Use the bottom row of FF keys to define your selection.
c. Repeat steps a-b as many times as necessary to enter the desired name.
• Press the * key to erase an entry.
• Press the # key to enter a space.
8. Press the HOLD key when the name is complete.
9. To enter another speed dial name, repeat steps 5-8.
10. Hang up or press the ON/OFF key.
30 ICX (International), issued March 1999 ICX-35-750