Setting The Voice Mail Tone - Panasonic KX-TG2650N Operating Instructions Manual

To erase a stored number
Press and hold
(CLEAR/INTERCOM)
•You can exit the programming mode any time by pressing (OFF).

Setting the Voice Mail Tone

If your voice mail service sends a voice mail tone after a new message has
been recorded, set to "On". "Voicemail" and "
the VOICE MAIL button on the base unit will flash when a message has
been recorded in your mailbox. You will hear a series of voice mail tones
followed by a dial tone after pressing
(Contact your service provider for details about your service.)
Set to "Off" if:
—you do not subscribe to a voice mail service,
—your voice mail service does not send a voice mail tone, or
—the unit is connected to a PBX.
Your phone comes from the factory set to "On".
Make sure the unit is in the standby mode initially.
1 Press
(FUNCTION/CH)
2 Press or
Ö
points to "Program".
3 Press (Yes key).
á
Press or
4
Ö
points to "Voicemail tone".
5 Press (Yes key).
á
6 Press or
Ö
Press (Save key).
á
•A beep sounds.
•To return to the standby mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
.
repeatedly until the arrow
Ñ
repeatedly until the arrow
Ñ
to select "Off" or "On".
Ñ
in step 6 on page 46.
" will be displayed and
, or
(DIGITAL!SP-PHONE)
H
GF
H
GF
GF
Program
H
=Yes
Save mailbox#
Voicemail tone
H
=Yes
Voicemail tone
:On
H
=Save
Voicemail tone
:Off
.
47