Flash Button - Panasonic KX-TG2650N Operating Instructions Manual

FLASH Button

Pressing
(FLASH/CALL!WAIT)
host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: "700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)". Your phone comes from the factory set to
"700 ms".
Make sure the unit is in the standby mode initially.
1 Press
(FUNCTION/CH)
2 Press or
Ö
points to "Program".
Press (Yes key).
3
á
4 Press or
Ö
points to "Set flash time".
Press (Yes key).
5
á
6 Press or
Ö
desired time is displayed, and press
(Save key).
•A beep sounds.
•To return to the standby mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
•If you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call etc.). Consult your PBX supplier for the correct
setting.
allows you to use special features of your
.
repeatedly until the arrow
Ñ
repeatedly until the arrow
Ñ
repeatedly until the
Ñ
H
Program
GF
Save DIRECT#
H
Set flash time
GF
Flash time
GF
á
H
=Yes
H
=Yes
:700ms
H
=Save
51